Well Type Annealing Furnace For Bearing Steel Coils

Send Inquiry
Well Type Annealing Furnace For Bearing Steel Coils
Details
A well type annealing furnace is used for batch heat treatment of bearing steel coils before further processing. Its vertical furnace chamber accommodates heavy coiled materials, making it suitable for steel plants and bearing material manufacturers that need to anneal large coil loads.
CHTEE's TE-A-MH-G series uses natural gas heating with a protective atmosphere of methanol decomposition gas and nitrogen. Different chamber sizes are available, with maximum charging capacities ranging from 16 to 36 tons per batch.
✅ Furnace type: Vertical well type annealing furnace
✅ Heating method: Natural gas
✅ Protective atmosphere: Methanol decomposition gas + nitrogen
✅ Maximum charging capacity: 16–36 tons, depending on model
✅ Insulation: Ceramic fiber insulation and refractory brick construction Cooling system: Forced cooling
Category
Annealing Furnace
Share to
Description

Annealing Requirements for Bearing Steel Coils

Bearing steel is used to manufacture components that operate under repeated contact and load. Its condition after annealing affects subsequent forming, machining and heat treatment operations. The required annealing process depends on the steel grade, initial microstructure and production route.

Spheroidizing Annealing

Spheroidizing annealing is commonly used for suitable bearing steels to promote a spheroidized carbide structure in the steel matrix. This helps reduce hardness and improve machinability or cold-forming performance before subsequent manufacturing processes.

Hardness Control

Bearing steel coils need to meet the hardness requirements specified for the next production stage. The annealing cycle should be selected according to the material grade, incoming condition and required final hardness. Hardness should be checked at representative positions after treatment.

Carbide Structure

The carbide condition is an important consideration in bearing steel processing. The required spheroidized structure depends on the steel grade and applicable material specification. Process development should consider both the heating cycle and cooling conditions.

Surface Condition

Bearing steel may require a controlled atmosphere during annealing to limit surface oxidation and other unwanted surface changes. The protective atmosphere and operating conditions should be matched to the material and production requirements.

 

 

 

Bearing Steel Coil Applications

Annealed bearing steel coils are used as feedstock for manufacturing different bearing components and related parts.

Material or Product Form Typical Manufacturing Application Annealing Considerations
Bearing steel wire rod coils Wire drawing and bearing component production Spheroidized structure and hardness
High-carbon chromium bearing steel coils Bearing rings and rolling elements Carbide condition and material uniformity
Bearing steel coils for cold forming Formed bearing components Workability before forming
Bearing steel coils for machining Machined bearing parts Hardness and machinability
Alloy bearing steel coils Special bearing applications Grade-specific annealing requirements

 

 

 

Spheroidizing Annealing Process for Bearing Steel

For suitable bearing steel grades, spheroidizing annealing is used to change the carbide morphology and prepare the material for subsequent manufacturing. The exact cycle depends on the steel composition, initial condition and required microstructure.

Heating

The loaded coils are heated according to the selected annealing cycle. Heating conditions need to account for the coil dimensions and the amount of material in the furnace so that the required temperature is reached throughout the load.

Temperature Holding

The holding stage allows the material to undergo the required metallurgical transformation. Temperature and holding time must be established according to the bearing steel grade and the target carbide structure.

Controlled Cooling

Cooling conditions are an important part of spheroidizing annealing. The cooling rate and temperature range affect carbide formation and the final material condition. The process should follow the applicable steel grade specification.

Inspection After Annealing

After cooling, the material can be checked against the production requirements. Typical inspection items include hardness, microstructure and surface condition. The inspection method and acceptance criteria should follow the customer's material standard.

Well Type Annealing Furnace for Bearing Steel Coils

 

TE-A-MH-G Well Type Annealing Furnace Parameters

CHTEE's TE-A-MH-G series offers several furnace chamber sizes for batch annealing of coiled steel materials, including suitable applications that require evaluation for bearing steel processing.

Model Heating Power Natural Gas Consumption Max. Charging Capacity Loading Size External Dimensions
TE-A-MH-G-240/240 45 kW 60 m³/h 16 t Φ2400 × H2400 mm Φ3900 × H3350 mm
TE-A-MH-G-280/240 65 kW 80 m³/h 24 t Φ2800 × H2400 mm Φ4300 × H3350 mm
TE-A-MH-G-320/240 65 kW 100 m³/h 28 t Φ3200 × H2400 mm Φ4700 × H3350 mm
TE-A-MH-G-360/240 85 kW 120 m³/h 32 t Φ3600 × H2400 mm Φ5100 × H3350 mm
TE-A-MH-G-360/340 95 kW 150 m³/h 36 t Φ3600 × H3400 mm Φ5100 × H4350 mm

 

 

Selecting a Well Type Annealing Furnace for Bearing Steel Coils

Bearing steel coil specifications and metallurgical requirements should be reviewed before choosing a furnace model. The following information helps determine the chamber size and evaluate the annealing process.

Selection Factor Information to Provide Why It Matters
Steel grade Bearing steel designation and material specification Determines the appropriate annealing route
Coil outside diameter Maximum and minimum diameter Helps confirm chamber loading space
Coil inside diameter Inner diameter of the coil Affects loading arrangement
Coil height Overall coil height Determines available chamber space
Coil weight Weight of each coil Helps calculate batch loading
Initial condition Incoming hardness and microstructure, if available Provides a basis for process development
Required annealing result Target hardness and carbide structure Defines the treatment objective
Batch quantity Number of coils per furnace cycle Helps evaluate loading capacity
Production requirements Required batch frequency and output Supports equipment selection

 

 

FAQ

1. Can a well type annealing furnace be used for bearing steel coils?

It can be evaluated for batch annealing of bearing steel coils. The suitable furnace model and process depend on coil dimensions, material grade, batch weight and the required metallurgical result.

2. Is spheroidizing annealing used for bearing steel?

Yes. Spheroidizing annealing is commonly used for suitable bearing steel grades to obtain a spheroidized carbide structure and prepare the material for subsequent machining or forming. The exact process depends on the grade and material specification.

3. Why is carbide structure important after bearing steel annealing?

Carbide morphology affects the material's hardness and processing behavior. The required structure should be defined according to the bearing steel grade and the requirements of the next manufacturing stage.

Hot Tags: well type annealing furnace for bearing steel coils, China well type annealing furnace for bearing steel coils manufacturers, suppliers, factory, annealing furnace, Bright Annealing Furnace, furnaces by process, Pit Annealing Furnace, Roller Hearth Heat Treating Equipment, Roller Hearth Type Annealing Furnace

Send Inquiry